Industrial Hygiene in Construction

After performing an industrial hygiene survey (air monitoring), have you considered when you should resample? Here are some considerations that might help you in determining when.

• Are there specific rules that state when you must resample? For example, the construction lead standard (1926.62) states that you must resample yearly (or actually, that you can only use relevant results for one year).
• Has the process changedsince the last time you sampled? This one is hard to determine. Lot of things can change air monitoring results, here’s a “starter list” of things that can change a process.
  • Different employee?
  • Time of year? Summer versus winter? (closed up/open and humidity)
  • Is a new tool in place?
  • Has the ventilation changed?
  • Have new controls been put in place? (administrative, systems operations)
• Has the product changed? Check the safety data sheet (aka MSDS).
• Are more (or less) employees exposed to this hazard? This might change some assumptions you have made about your risk.?

If you have air sampling performed, make sure you have a written report of your findings. Laboratory results without an explanation of how they sampled, where, # of employees, process description, PPE used, safety data sheets, etc….is worthless. You may remember is well enough, but OSHA will have a hard time believing that it is a similar exposure the next time you do the “exact same thing”.

Having this report and sharing it with the employees will fulfill (part of) the hazard communication standard requirement to employees.

When performing air monitoring it can be useful to take multiple samples on the same individual throughout the day. Here are some reasons to change out the filters:

• build up of dust on filter – can cause overloading
• break-out the exposure data. Morning versus afternoon, or by job tasks, or the physical area the employee is working in, controls vs. no-controls, etc.
• if you question the employees motives. If you think the employee might skew the results, multiple samples might give you better control- or at least tell you if one is way-out-of-line.

Once you have your data results, how do you combine them?

If you’re taking particulate (dust, lead, cadmium, silica, etc) and you have the concentrations (from the lab) here is what to do.

1. note the time (in minutes!) and the concentration results (mg/m3, ug/m3, etc) for each sample
2. multiply the time and concentration for each – then add each number together
3. finally, divide the above number by the total number of minutes sampled. This is your time weighted average (TWA).

Simple?! Yes. …And it’s really easy to make a mistake too. Check your math, and then eyeball the results and see if they make sense logically.

Here’s an example:

Andrew took three samples during one shift while Shelley was rivet busting through leaded paint. The first sample (118 minutes) was reported as 6.8 ug/m3 of lead, the second was for 245 minutes and had a concentration of 18 ug/m3. The last sample was taken for 88 minutes and was reported a level of 29 ug/m3. The overall results is 17.2 ug/m3 for the total time sampled. (Side: if you sampled for their entire exposure, and they worked longer hours, you could add those hours (assuming zero exposure) into the final time-in step three)

See the math below:

This is a big distinction when evaluating a workplace.

If you find an overexposure (or simply a real-exposure), then it is prudent, and expected, to look for employees with possible symptoms.

If employees have symptoms (especially those nondescript ones, like; nausea, dizzyness, and fatigue) it is much harder to say they have an exposure. You really can’t make that assumption without more information.

For example, if you have cancer, do you assume it is from all the bad food you ate during your lifetime? or, is from multiple factors? On the flip side, if you are a pile driver for 30 years and at the age of 60 you find that you have hearing loss, everyone assumes it’s from your job.

However, a lot of industrial hygiene work comes from “my employees have these symptoms”. The hard part is taking that information and determining if there is concern in the workplace.